EVO 8.1 P1 daylight again !

crashes, error report
Locked
beta-pt
Posts: 36
Joined: Thu Mar 22, 2012 8:53 am
Location: Czech Republic
Contact:

EVO 8.1 P1 daylight again !

Post by beta-pt » Wed Jan 16, 2019 11:49 am

Hi Dial.

You repaired daylight calculation surface, but we have a problem with calculation points in surface. Now miss points on down and right side of surface !
81evo day.PNG
81evo day.PNG (10.15 KiB) Viewed 546 times
Přemysl Tomšovic - Accredited trainer
Top osvětlení s.r.o.
http://www.top-osvetleni.cz
http://www.top-osvetleni.cz/sluzby/vypocty-osvetleni

kvkozierowski
Posts: 351
Joined: Mon Mar 19, 2012 9:29 am
Contact:

Re: EVO 8.1 P1 daylight again !

Post by kvkozierowski » Wed Jan 16, 2019 12:01 pm

Hi beta-pt,

The upper line in the screenshot seems a very little bit tilted, can you please check if your walls are 100% square with 90° angles in all four edges? If it is not 100% rectangular the points may no longer be within the grid/calculation area.

Best regards
Kolja

beta-pt
Posts: 36
Joined: Thu Mar 22, 2012 8:53 am
Location: Czech Republic
Contact:

Re: EVO 8.1 P1 daylight again !

Post by beta-pt » Wed Jan 16, 2019 12:16 pm

You have right. The room has to be with 90 angels. I have in one corner less. ok. thanks.
Přemysl Tomšovic - Accredited trainer
Top osvětlení s.r.o.
http://www.top-osvetleni.cz
http://www.top-osvetleni.cz/sluzby/vypocty-osvetleni

Locked

Who is online

Users browsing this forum: No registered users and 2 guests