Street Lighting_Documentation

crashes, error report
Locked
pchai
Posts: 8
Joined: Fri Sep 08, 2017 10:45 am

Street Lighting_Documentation

Post by pchai » Sun Mar 29, 2020 3:38 pm

Dear Team,

While working with street lighting in dialux evo, i realized that despite changing the connected load and luminous flux manually, these values are not depicted in documentation but just the initial values (not dimmed). What should i do so as to have the changed values in the documentation?


Best Regards,

pchai

Csuleiman
Posts: 1946
Joined: Wed Mar 07, 2012 3:07 pm

Re: Street Lighting_Documentation

Post by Csuleiman » Mon Mar 30, 2020 6:58 am

Hello pchai,

The information given in the luminaire product data sheet always refers to the unmodified luminaire with the original manufacturer's data. If you now modify the luminaire and use it in road planning, you will only receive the modified values in the "Planning results" output page, which refers directly to the road scene. There you will also see the entry "user defined". Please have a look at the screenshots below.

Screenshot 1.JPG
Screenshot 1.JPG (233.77 KiB) Viewed 500 times
Screenshot 2.JPG
Screenshot 2.JPG (174.58 KiB) Viewed 500 times
Screenshot 3.JPG
Screenshot 3.JPG (203.34 KiB) Viewed 500 times

Best regards,
DIAL Support Team

pchai
Posts: 8
Joined: Fri Sep 08, 2017 10:45 am

Re: Street Lighting_Documentation

Post by pchai » Mon Mar 30, 2020 7:25 am

Many thanks for the prompt reply.

Best Regards,

Pchai

Locked

Who is online

Users browsing this forum: No registered users and 8 guests