Page 1 of 1

Emergency Lighting Results at Floor Level

Posted: Tue Jun 28, 2022 11:20 am
by J_F
Dear Dialux,

The calculation objects/Emergency Light Scene option in the documentation list is very useful for rapid overview of the results. however only results at working plane level are shown. Is there an option for emergency lighting results at 0m/floor level?

Thank you

Re: Emergency Lighting Results at Floor Level

Posted: Tue Jul 12, 2022 8:22 am
by J_F
Could someone respond as my customers are awaiting an answer. Thanks

Re: Emergency Lighting Results at Floor Level

Posted: Wed Jul 13, 2022 5:59 am
by kvkozierowski
Hello J_F,

The emergency lighting results are already at floor level (0.0m) if you do not change the height of the anti panic surface or escape route:
emergency.PNG
emergency.PNG (77.43 KiB) Viewed 691 times

What do you mean by "however only results at working plane level are shown"?

Best Regards
Kolja

Re: Emergency Lighting Results at Floor Level

Posted: Thu Jul 14, 2022 7:13 pm
by J_F
Dear Kolja,

Thank you. This means I will have to insert an anti panic surface for every room <60m2.

Is there a way a room with just a working plane of 0.8m can be shown at 0m in the emergency lighting output without an anti panic surface?

Re: Emergency Lighting Results at Floor Level

Posted: Fri Jul 15, 2022 7:02 am
by kvkozierowski
Hello J_F,
Is there a way a room with just a working plane of 0.8m can be shown at 0m in the emergency lighting output without an anti panic surface?
It is not possible to do this, the working plane and anti panic surface are two very different calculation objects. You can add an anti panic surface with just one click.

Kolja